PIR Occupancy Sensors

PIR Sensors

Approx Price: Rs 1,500 / Unit(s) 
General Information:Motion sensor is a fully automatic indoor and outdoor security/courtesy light controller capable of controlling up to 1000W incandescent or 30W x 10 fluorescent of lighting. At night, the built in passive infrared (PIR) motion sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in photocell sensor saves electricity by deactivating the lights. An adjustable time lets you select how long the light stays on after activation. The LITE adjustment determine at what light level the lighting system will start operating when you set the motion sensor to automatic modeMain Features: • Stand alone 220V AC operation Room • Can switch light load of up to 300 Watts • Detection Range 3m radius at 10ft height • Lux Level Control - Time control • Re-trigger FunctionApplications: • Offices / Conferences • Toilets • Pantry • Stores / Stairways • Lifts / Lift Lobby • Dining Area / Canteen • Basement / Covered Parking Area • Locker /Safe Room in banks/ Vaults • ATMs - Colleges/ Schools/ Institutes • Multi- Apartment Complexes • Hospitals /Nursing Homes Specifications:  • Rated Voltage: 230V AC 50Hz • Load Wattage: Max.1500W incandescent bulb or Max. 300W fluorescent lamp • Detection Area: Max. 5 Meters in radius • Detection Angle : 360° around • Time –delay : From 10 ± 5 seconds to 4 ± 1 minutes adjustable
Additional Information:
  • Item Code: OF7BN

Microwave PIR Motion Sensor

Approx Price: Rs 2,000 / Piece(s) 
The product is a new Energy Saving Sensor, it adopts Microwave Sensor mould with high-frequency electro-magnetic wave (5.8Ghz) and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions. The wide detection field depends on detectors. It works by receving human motion. When one enters in the detection field, it can start the light load & when there is no active human presence the light will be deactivated automatically. It also automatically identify day and night. Its installation is very convenient. Detection is possible to go through doors, panes of glass or thin walls.Applications: • Conference Room / Meeting Halls • Office / Stores • ATM / Malls • Locker Rooms / Basements • Corridors • And Many More!!!Specifications: Detection Range 360° Power Source 220-240V/AC Power Frequency 50/60Hz HF System 5.8GHz CW radar, ISM band Transmission Power <0.2mW Rated Load Max.1200W & 300W Detection Distance 1-8m (radius), adjustable Time Delay 10 sec±3 sec to 12min±1min(adjustable) Ambient Light <3-2000LUX(adjustable) Detection Motion Speed 0.6-1.5m/s Installation Height 1.5-3.5m Power Consumption Approx.0.9W Detection Speed 0.6 -1.5m/s

PIR Motion Sensor HC 7D

Approx Price: Rs 1,500 / Unit(s) 

PIR Motion Sensor For Light Control With Manual Override HC-7D

 

HC-7D sensor switch can detect the infrared Rays released by human body motion within the Detection area, then start the load-light automatically. This PIR Sensor has an extra feature of manual override. HC-7D has a longer detection range and wider angle, it is better for security use.


Applications:


  • Garage
  • Corridor
  • Stairways
  • Near Gate
  • Basements
  • Parking Areas
  • Lockers / Safe Rooms
  • ATMS / Colleges / Schools / Institutes
  • Multi-Apartment Complexes
  • Hospitals / Nursing Homes
  • Malls and many more places.

 

PIR Motion Sensor for Lights HC - 7E

Approx Price: Rs 1,900 / Unit(s) 
PIR Motion Sensor for Lights HC - 7EGeneral Information:Motion sensor is a fully automatic indoor and outdoor security/courtesy light controller capable of controlling up to 1000W incandescent or 30W x 10 fluorescent of lighting. At night, the built in passive infrared (PIR) motion sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in photocell sensor saves electricity by deactivating the lights. An adjustable time lets you select how long the light stays on after activation. The LITE adjustment determine at what light level the lighting system will start operating when you set the motion sensor to automatic mode,Features: • Wall Mount Suitable • Weatherproof - IP44 • Time & LUX Adjustment • Patented Modern Design • Automatic Operation • Saving of Electricity Specifications: PIR Lights Specifications HC - 7E Power Requirement AC 220 ~ 240V / 50Hz Lighting Load Max 1,000W Incandescentor Max 300 W Fluorescent Detection Angle Up to 120° at 20° C Detection Distance Min. 14M at 20° C Swiveling Angle Horizontal 70° Vertical 35° Mounting Height Recommended at 1.8 ~ 2.0M (5.9 ~ 6.6 Ft) Wall Mount Wall Switch Control On / Off Sensor Operation Auto Time Adjustment From ( 10 ± 5) sec. to ( 4 ± 1) minutes Lux Adjustment Approx. 0 ~ 1,000Lux Operating Temperature -20° C ~ +40° C Warm Up Time About 1 min Protection Class II Protection Degree IP44  

PIR Motion Sensor For Lights

Approx Price: Rs 1,800 / Piece(s) 

PIR Motion Sensor for Lights (With Halogen Lamps HC-150W / HC-500W)

The infrared induced lamp has an infrared detector with it. When the thermal body moving in the darkness the detector will light the lamp automatically and turn off after a period of time set in advance.


Features:


  • PIR Motion Sensor with Floodlight
  • Day and Night mode
  • Time adjustment
  • Selectable sensitivity of the detector

 

Specifications:

Power Source :

AC 220/240, 50Hz

Max Lighting load :

150W/500W (Halogen tube)

Detection angle :

up to 120 °

Detection range :

up to 14Meters

Time adjustment :

(10 ± 5) sec. to (4 ± 1 ) min

Warm uptime :

about 1 min

Mounting Height :

1.8 Meters to 2.4 Meters

Ceiling Mount PIR Motion Sensor With Light HC-25A

Approx Price: Rs 3,500 / Unit(s) 

Ceiling Mount PIR Motion Sensor With Light HC-25A


HC-25A (Ceiling Light with PIR Sensor) can detect the infrared rays released by human motion within the detection area, and then start the in built load -light automatically. The unit is for indoor use only. HC-25A is the ceiling lamp, it is IP20 waterproof class. The customers usually install this sensor in the living room, restroom, corridor, and verandah.

 

Applications:


  • Living Room
  • Rest Room
  • Corridor
  • Verandah
  • Lifts / Lift Lobby
  • ATM’s
  • Hospitals / Nursing Homes

 

Specifications:

 

  • Rated Voltage: 230V AC 50Hz
  • Load Wattage: Max. 2x25W incandescent bulb or Max. 2x9W fluorescent lamps
  • etection Area: Max. 4 meters in radius
  • Detection Angle: Max. 360º around
  • Time-delay : From 10±5 seconds to 4±1 minutes adjustable
  • LUX Control Level : From daytime to darkness adjustable
  • Protection Class : IP20

 

Occupancy Detector HC-22

Approx Price: Rs 2,950 / Unit(s) 

Features:


  • 360°micro motion detectable
  • Photo sensor inside for smart control
  • Ceiling surface mount design
  • Run-on time adjustable-Ambient lux. setting adjustable
  • Up to 1500W loading for fluorescent (T8)
  • Smart RelayTMinside to protect the product life

 

Specifications:


  • Power requirement: 220 ~ 240VAC / 50Hz
  • Loading : 2,000W for incandescent
  • 2,000W for halogen
    1,500W for fluorescent (T8)
  • Detection Angle: 360°
  • Detection Range @2.5m height: F= 6m for micro motion
    F= 10m for walk across motion
  • Run-on time setting: 10 sec. ~ 40 min
  • Ambient light setting: 30 ~ 200 Lux.
  • Operation mode: Auto
  • Warm-up time : Approximately 1 minute
  • Smart Relay: Yes (Ver2.0+)
  • Isolation Protection: Class II
  • Water proof : IP44
  • Working temp.: -10°C~+40°C
  • Storage temp.: -20°C~+70°C
  • Power consumption: 1W maximum
  • Dimension (W*L*D): 86mm*86mm*42.5mm
  •  

    Looking for PIR Occupancy Sensors ?
    Share Us:
    © Ozone Fortis Technologies Pvt. Ltd.
    Desktop Site Back to top